Česky
Deutsch
Fenders use the original mounting points. (Exceptions may fenders on certain models category "naked bikes").
When installing, ensure the correct drilling mounting holes and then tighten the screws with a flair for the right fender position.
Installation instructions, hints, tips for installation found here >>>
Basic and cheapest version is GFK fiberglass. Thanks to the precision of employees in handmade production and the emphasis on the quality of these products, they have perfect flexibility, durability and low weight. Composition - UV stable white gelcoat (not paint), fiberglass mat and fiberglass cloth impregnated with resin. In the stressed and susceptible places to break the parts are reinforced by Kevlar-Carbon layers as needed, or Coremat for the seats. Parts are flexible and have mostly a smooth surface. Are made for paint job.
More Images here >>>
Why GFK- fiberglass? For example those who want to put fairings on for the circuit at low cost. Or inexpensively replace a precious piece (broken) original.
Composition - UV stable gelcoat - colored (black RAL 9005), fiberglass mat and fiberglass cloth impregnated with resin. In the stressed and susceptible places to break the parts are reinforced by Kevlar-Carbon or Coremat for the seats. Parts are flexible and have a smooth and polished surface. There is no need to paint!
More images here >>>
Why GRP - colored fiberglass? - Nice polished parts, for those who want to save for the paint job if they fit accessory in black. After hitting with for example Gravel, the part remains black of the damaged place.
Plain carbon fabric + glossy look layer.
Manufactured in an autoclave, thanks to which the parts have extra light weight and hardness.
The parts are light and stronger than GFK parts and considerably lighter than ABS (about 30-50%)
It is not necessary to paint. Ready for installation incl. pre-drilled holes.
Why Carbon design? - Combination of aesthetic design and functionality. Low weight and hardness. Suitable not only for "show bikes".
Plain carbon fabric + matte look layer.
Manufactured in an autoclave, thanks to which the parts have extra light weight and hardness.
The parts are light and stronger than GFK parts and considerably lighter than ABS (about 30-50%)
It is not necessary to paint. Ready for installation incl. pre-drilled holes.
Why Carbon design? - Combination of aesthetic design and functionality. Low weight and hardness. Suitable not only for "show bikes".
Twill carbon fabric + glossy look layer.
Manufactured in an autoclave, thanks to which the parts have extra light weight and hardness.
The parts are light and stronger than GFK parts and considerably lighter than ABS (about 30-50%).
It is not necessary to paint. Ready for installation incl. pre-drilled holes.
Why Carbon design? - Combination of aesthetic design and functionality. Low weight and hardness. Suitable not only for "show bikes".
Twill carbon fabric + matte look layer.
Manufactured in an autoclave, thanks to which the parts have extra light weight and hardness.
The parts are light and stronger than GFK parts and considerably lighter than ABS (about 30-50%).
It is not necessary to paint. Ready for installation incl. pre-drilled holes.
Why Carbon design? - Combination of aesthetic design and functionality. Low weight and hardness. Suitable not only for "show bikes".
Didn't find what you need to know in the part description? Contact us.
