Česky
Deutsch
High Beam:
Watt: 11W / Lumen: 900LM / Lux: 32LUX / Candle Power: 20000
Low Beam:
Watt: 9W / Lumen: 800LM / Lux: 15LUX / Candle Power: 9300
Position Light:
Watt: 4W
Are you looking for LED headlights with a neoretro aesthetic? The new circular headlights from Puig will give your motorcycle a vintage look without giving up the best lighting technology. The design of this optical group fits perfectly with all types of models, especially those with cafe racer details or preparations with naked units as a base.
Its development has been carried out at the Puig Hi-Tech Parts facilities, under the quality standards of the component manufacturer. The full size of the piece is 175 millimeters wide (6.89 inches) and 160.4 millimeters high (6.31 inches). The distance between the mounting point and the headlight is 139.2 millimeters, a fact that corresponds to the size of the housing in black.
The buyer of these universal LED headlights should take into account the technology of their own motorcycle for mounting. If your unit includes LED position lights as standard, you can activate the high and low beams as you would before the modification. That is, when activating position it would have an LED light and when changing (short or long) the LED system will turn off. If your motorcycle only has short and long range lights, they will be activated equally but together with the LED groups.
The parts necessary for its coupling are delivered together with the headlight: two screws, two thin washers and two other higher density washers. At this link you can find the assembly instructions.
Installation or Technical notes :
Installation of Projectors (lights) :
How to order the installation?
1. Order selected types of projectors and installation of holders in our Eshop.
2. Order or deliver to us a part in which you want to install.
3. Send us a sketch of the approximate location of the projector.
Do you need advice on choosing?
Delivery:
1 x Puig universal LED headlight
Mounting material: two screws, two thin washers and two more thick washers. Below in the gallery you will find the mounting instructions.
Notice:
If your motorbike is equipped with LED position lights as standard, you can activate the high and low beam as before the conversion. This means that when you activate the headlights, the LED light would come on (daytime running light), and when you activate the high beam or low beam, the LED system would go out. If your vehicle only has high and low beams, they will be activated in equal parts, together with the LED groups.
Didn't find what you need to know in the part description? Contact us.
