Front Bracket Honda CBR 600RR 03-04,05-06

ALU Black

Code: H6-DCS03-06|AL

Price without VAT: 124,00 €

Shipping calculator
Front bracket Honda CBR 600RR 03-04,05-06 forza holders
Front bracket Honda CBR 600RR 03-04,05-06 forza holders
Front bracket Honda CBR 600RR 03-04,05-06 forza holders
Front bracket Honda CBR 600RR 03-04,05-06 forza holders
Front bracket Honda CBR 600RR 03-04,05-06 forza holders on bike
7Images
Front bracket Honda CBR 600RR 03-04,05-06 forza holders on bikeFront bracket Honda CBR 600RR 03-04,05-06 forza holders
Product description
Installation
Materials / design 1
Technical specifications
Question

Front Bracket Honda CBR 600RR 03-04,05-06 contains:

  • Rubber Bushing 1x Front Bracket Honda CBR 600RR 03-04,05-06
  • Rubber Bushing 3x Rubber Bushing
  • Rubber Bushing 2x Quick fastener D-ring - 1pc
  • Rubber Bushing 2x Counter part for D-ring - 1pc
  • Rubber Bushing 2x Washer black for D ring - 1pc
  • Rubber Bushing 4x Rivet - 1pc

Honda CBR 600RR 03-04,05-06

  • Serves as a tachometer holder as well as an upper part holder (especially for racing use)
     
  • Its cca about 30-50% cheaper than original front bracket.
     
  • Its made from duralumin and the surface is coated by black paint.
     
  • Design is light and strong, so as to meet the needs of racing.

Set includes :

  • Front bracket
  • Fasteners (allen head) with washers.
  • Rubber bushings for Tachometer.

Materials / design

Video

ALU Black

Dural material combines low weight and strength. This material is used for racing tachometer brackets and rear sub frames. They are lighter than original parts and have a lower purchase price. Finished with black lacquer, which does not change over time. 
Why buy DURAL Motoforza Parts? Unlike the fragile original, high toughness. There is less risk of total destruction if the motorcycle falls. The original disintegrates without repair. Duralumin part can usually "straighten" and finish after repair racing weekend.

Installation

  • Easy installation by exchange for original front bracket.
  • Due to quick fasteners very simple and faster installation and uninstallation of upper part.
  • Preinstalled counter parts of Quick fasteners.
  • TIP: If necessary, riveted bayonet fastener can be drill out and use a conventional screws, e.g. Using threaded rivet nut.

Installation instructions, hints, tips for installation found here >>>

Technical specifications

  • The front bracket is for use with original instruments (tachometer).
  • Unlike fragile original high toughness.
  • When the fall of the motorcycle have a lower risk of total destruction. Mostly it can be straighten and finish the weekend after repair.

Your questions

Didn't find what you need to know in the part description? Contact us.

In order to better personalize the website for you, we store cookies. By using the website, you agree to this. I need more information