Motoforza - DUCATI V4 PANIGALE - Main Features

Ducati V4R - New fairings for italian beauty Ducati V4 a V4R 2018-2021.

 

Fairings Motoforza in generall

Beautiful design and sophisticated fairings in every detail, these are Motoforza fairings of the new generation. They are created on the basis of new innovations and developments in technologies since 2010, using the experience of working with composites for over 30 years.

Even though the new models are increasingly complex to develop and manufacture, they are designed for as simple assembly and functionality as possible, and at the same time low weight. They are flexible, made of the highest quality composite materials with the last layer of fabric and kevlar-carbon reinforcements in stressed areas, thanks to which the parts have excellent durability and resistance. All of this meets the highest requirements of you, our customers, whether on the field of world championships, hobby racing or on the road.

We deliver in several material designs and in different product versions.

Most parts use original mounting brackets and mounting points are clearly indicated. On request, it is possible to pre-install a quick-fasteners system with screws into the fairings.

Main features of the Motoforza fairings Ducati V4

Dress up your Ducati V4 in the V4R "design"! Predatory design. Especially for racing use, which is based on the original design. We offer 3 versions: GRP-fibreglass, GRP-Racing, Performance.
For composite production, individual parts are usually simplified during development, Motoforza pays attention to the elaborate design of the parts, very similar to the original one in order to preserve the unique identity and aerodynamics of the motorcycle.

  • Functionality and flexibility - precisely manufactured and connected layers of laminate composite. The parts are flexible for easier assembly.
  • Durability - reinforced with Kevlar-Carbon reinforcements in the places of connections and mounting brackets. Extra reinforced with additional layers in stressed areas. The individual parts are designed with a design edge, which also increases the durability and resistance of the parts to cracks and bending when heated (e.g. from the heat of the exhaust).

  • Installation - parts use original mounting brackets. To connect the upper part with the side parts, the oil sump (lower part) and the tank cover, 16 pc (quick-clamping-bayonet) screws with rivet counters are needed. We recommend the D-ring type for easy handling. However, the offer also includes Allen screws. Our fairings for the Ducati V4 are developed for the installation of both - riveted (photo 2,4) and clip-on (photo 3) counter parts in pre-prepared places in the fairing.

Ducati V4 Panigale - Motoforza fairings
Fairings parts:

Motoforza Ducati V4R fairigns also fit the regular V4 and V4S 2018-2021 models.
Fairing parts have edges for better durability and strength.

Upper part in several versions: Design without winglets or for R winglets (Original shape)

On request, it is possible to reduce or enlarge the fairing inlets.

The upper part without winglets fits original or racing screen 2018.
Upper part for wings V4R 2019 - fits original or racing screen 2019, is 1.5 cm longer.
The upper parts fit on the original or racing tachometer holder. Replicas of SBK headlights can be glued to the top part.

Lower part - the racing oil sump we supply in several designs, without cut-outs or with a cut-out for the Akrapovic, Arrow exhaust.

It is developed to also fit with the enlarged clutch cover. According to the rules, it can hold 4 liters of oil, on request we can install a drain plug for free.
For now use with racing stand only.

Side parts fit even with the use of frame covers, without chafing.

Seat - back part - designed for use with the Original Polster (seat), it is made of 2 pieces, top and bottom, so that the beautiful design of this part stands out, connected in 1 piece thanks to pre-installed threaded nuts and M5 screws (on request it is possible replace with a quick-clamping system-hex screws). For easier installation and uninstallation.
Fits with original and racing Motoholders seat frame.

For assembly, the original plastic around the radiator, the plastic under the inflator is left on the motorcycle. ABS transition between racing airduct and frame.

Open the Eshop and parts offer >>>

Open the gallery fairings on the motorcycle >>>

 

In order to better personalize the website for you, we store cookies. By using the website, you agree to this. I need more information